|
|
|
| Home | Above Ground Pools | Quick Pools | Quick Pools Installation Pictures |
Quick Pool Installation
 |
|
|
1.Lay Out Pool Pad (optional) |
5. Thread Lateral Poles and Feed Uprights Through Holes |
 |
 |
|
2.Layout Poles Ready to Install |
6. Thread Uprights through Bottom Retaining Holes |
|
|
|
|
3. Layout Liner ready to Unroll |
7. Erect Pool One Pole at a Time |
 |
|
|
4. Unroll Liner and Center It On The Pad |
8 Install Ladder and Filter System and The Pool is Ready to Fill |
 |
|
| Important Warranty Information: Water level in this pool must be kept at or above 42 inches. Failure to comply with this will cause damage to your pool that is not covered by warranty. Once assembled the pool must be filled least 42in with water immediately to avoid this problem. Do NOT drag or pull an assembled pool that contains water into a new position or ripping or snapping of a top loop on the vertical upright may occur. When this kind of damage occurs it is distinctive and does violate warranty coverage so please keep your pool filled. |
