|
|
Above Ground
Pools, Portable Pools and Pool Supplies At Discount Prices
|

The Quick Soft
48 Portable Pools, Beauty and Quality in One.
Fill
Out the Form Below And we will call you concerning this pools.
Call
Back Times are 10:00am - 6:00pm
To
Contact Someone 24/7 call 1-213-713-3510

For Domestic Calls Please
Include your Area Code
For International Calls
(outside of the US) Please Include your Country Code and Area Code

| Preparing the Pool Water |
1. Test & Adjust Pool
Water Readings
After the pump/filter has
run for 4 - 6 hours, take a pool water sample to your Authorized
POOLIFE Dealer for a
full analysis. Balance the
water per the dealer's recommendations. If metals are
detected, add POOLIFE Metal
Control per label
directions. (Your dealer will test for and advise you how to
adjust the following pool water
readings: pH, Total Alkalinity,
Chlorine, Calcium Hardness and Cyanuric Acid - if you
use ENDURE they will also
test the borate reading). |
2. Shock Treat
Shock treat pool water with
POOLIFE TurboShock® or POOLIFE Rapid Shock. |
3. Add Algaecide
Add an initial dose of
your preferred POOLIFE Algaecide. |
4. Stabilize
Add stabilizer if
desired. |
|
5. Add Primary Sanitizer
Once the pool water is
clean and clear and the water balance readings are within the
recommended ranges, it is
time to add your preferred
POOLIFE Sanitizer (Always read the label directions for dosage
instructions).
|
Home
- Above Ground
Pools - Pool Outlet - Information
Data Base - Parts
- Site Index
- E-mail Us |