|
CHECK FOR POOL DAMAGE
AND WEAR
Ø
Periodically check your
pool and ladder components for damage and wear. Be sure all
screws are in place. Replace all damaged or worn components
and tighten all screws before you use the pool, deck or
ladders.
DO NOT MODIFY POOL
Ø
Never modify the pool or
accessories, or remove or drill holes in the pool, deck or
ladder components unless instructed.
SHARP EDGES
Ø
There is a possibility
that a sharp edge may have been formed on a metal part during
the manufacturing process. Check all pool, filter, ladder or
deck parts for sharpness. In the event that you find a sharp
edge on a metal part, please take steps to remove it with
sandpaper or a file or return it for replacement.
REPLACMENT PARTS
Ø
Always use Original
Equipment Manufactured (OEM) parts for your replacement
requirements.
KEEP WATER CLEAN
Ø
Always keep your pool
water clean so that the bottom is visible at all times.
Individuals must be able to see that the water is too shallow
for diving, and must be able to see small children in the
pool!
INSTALL POOL
ABOVEGROUND
Ø
Never install your above
ground swimming pool below the ground surface. This pool must
be installed on the ground surface only. There should be a
flat, three (3) foot area (minimum) around the outside
perimeter of your pool. This is for the continued enjoyment of
your pool.
|
